Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Configuration Display, Delete and Operation Commands

Function

Try to commit (dynamically activate) the candidate config, or re-commit the startup-config 
if the try time period expires.

Available Model

XG0224 / XG0448 / XG2600

Syntax

commit try time <time>

Options

<time>
Specify a time period (from 1m to 24h) until retrieving the startup-config.
The unit shall be d (day), h (hour), or m (minute).

Use Mode

Configuration mode (admin class)

Explanation

Apply the configuration that was set or changed with the configuration command, without 
device restart, and retrieve the startup-config in the specified time.

Caution

•

•

commit try time

•

If you want to execute these commands, please cancel retrieving the startup-config, 
using 

load startup-config
commit

If the startup-config (config0 or config1) is not same the configuration before editing for 
try, Old configuration would be lost.

Message

Since "commit try time" command already working, it cannot be applied.
Execute after canceling retrieving the startup-config by the 

An unallowable configuration was created and cannot be applied.
Execute the 

 command after the 

 command to restart the device.

No configuration is added or changed.
It is not necessary to execute the commit command.

Execution Example

Reference

<ERROR> Need to do reset after execute the save command.

<ERROR> Waiting switch-back to old configuration

<WARNING> The candidate-config is not changed.

# commit try time 10m commit

#