Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 2 Using the CLI

Overview of the CLI

for the device as below.

A VT100, VT200, or xterm can be used as a terminal.

The following table shows a hierarchy of command modes and mode switching.

The flow of system operation via command execution is as follows:

1) Login to the device.

2) Run an operation command to manage system operations.

3) Run a configure command to move to configuration mode.

4) Run a configuration command to set candidate configuration (candidate-config).

5) Run a commit command to apply the candidate configuration as a running configuration (running-config).

6) Run a save command to save the candidate configuration as a startup configuration (startup-config).

7) Run an exit or similar command to return to operation mode.

8) Repeat steps 2) through 7)

9) Run an exit command to log out.

XG2600(config)# ether 1 vlan untag 1

XG2600(config)# lan 0 vlan 1

XG2600(config)# lan 0 ip 192.168.1.1/24 3

XG2600(config)# commit

XG2600(config)# save

Reference

, 

Login 

user name

Operation mode

Operation command 

Configuration mode

Candidate configuration
(candidate-config)

Running configuration
(running-config)

Startup configuration
(startup-config)

Operation command

Configuration command

User

class

Admin

class

exit / !

exit

user

admin

admin / su

Admin

class

exit / ! / end / quit

load

reset / Reconnect power

commit

exit

save

load

configure