Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 6 Managing the Device

Saving/Restoring Configuration Information

6.2 Saving/Restoring Configuration 

Information

This device allows you to save/restore configuration information using the following methods:

•

Saving/restoring configuration information using FTP

•

Saving/restoring configuration information using a CompactFlash card

•

Saving/restoring configuration information using USB memory

This device provides FTP and SFTP server functions, and allows you to use PC or UNIXR system ftp and sftp commands 
to save/restore configuration information.

This section presents an example of using the XG2600’s FTP server function with ftp commands.

To use the SFTP server function, sftp client software supporting SSH protocol version 2 is necessary. This would allow 
you to use sftp commands just as you use ftp commands.

Use the following user name and password with the FTP server function:

•

User name

: ftp-admin

•

Password

: Specify the password configured with the password command

z

The FTP server function maintains files with the following names:

•

Configuration information 1

: config1

•

Configuration information 2

: config2

z

Enter "get reset" as a subcommand for the ftp command to restart the device.

To switch the configuration information, use "get reset1" or "get reset2" to restart the device.

•

When get reset" is entered

: The current configuration information takes effect after restart.

•

When "get reset1" is entered

: Configuration information 1 takes effect after restart.

•

When "get reset2" is entered

: Configuration information 2 takes effect after restart.

Precautions

• It is strongly recommended to define the password to ensure security.

While no password is defined, anyone can access to the device from the network, resulting in a very dangerous 
situation.

Available Model

Note

When the password is not defined, the FTP server function works assuming that no password exists.

Reference