Fujitsu FR81S Manual De Usuario
CHAPTER 38: CRC
4. Registers
FUJITSU SEMICONDUCTOR LIMITED
CHAPTER
: CRC
FUJITSU SEMICONDUCTOR CONFIDENTIAL
9
4.3. CRC Input Data Register : CRCIN (CRC INput data
register)
The bit configuration of the CRC input data register is shown below.
This register sets the input data for the CRC calculation.
CRCIN : Address 1138
H
(Access: Byte, Half-word, Word)
bit31
bit30
• • •
bit2
bit1
bit0
D[31:0]
Initial value
0
0
• • •
0
0
0
Attribute R/W
R/W
• • •
R/W
R/W
R/W
[bit31 to bit0] D (Data) : Input Data bits
These bits set the input data for the CRC calculation. Software writes the input data for the CRC calculation.
The bit width of 8, 16 or 32 is used. These bits width can be mixed. Bytes or half words can be written into any
position. The address position can be +0, +1, +2 or +3 for byte writing and +0 or +2 for half word writing.
MB91520 Series
MN705-00010-1v0-E
1278