ATI Technologies GL 8800 Manual De Usuario

 

To install your graphics accelerator card, follow these steps: 

 

Then disconnect all cables from the back of 

your computer. Unplug all power cables from the electrical source.

Note: 

If you are disconnecting a peripheral from the computer or are 

removing a component from the system board, wait 10 - 20 seconds 

after disconnecting the computer from the electrical outlet before 
disconnecting the peripheral or removing the component to avoid 

possible damage to the system board.  To verify that all power has 
been removed from the system, make sure that the standby power 
light-emitting diode (LED) on the system board has gone out

.