Honeywell HMLCD17e2 Manual De Usuario
24
Troubleshooting
Troubleshooting
Issue:
No image is displayed on screen.
Possible
Solution:
Solution:
•
Check that the power cord has been connected securely into the
wall outlet or grounded extension cable or surge protector.
wall outlet or grounded extension cable or surge protector.
•
Power switch should be in the ON position and the LED should be lit.
•
Check that the Brightness and the Contrast adjustments have not
been turned down to the minimum levels.
been turned down to the minimum levels.
Issue:
’Going to Sleep’ message displayed on screen.
Possible
Solution:
Solution:
•
The signal cable should be fully connected to the video
card/computer.
card/computer.
•
The video card should be completely sealed in the slot and the
computer is switched ON.
computer is switched ON.
Issue:
Display image is not centered, too small or too large in PC mode.
Possible
Solution:
Solution:
Push the down key on the front of the monitor or the Auto button on the
remote control.
remote control.
Issue:
Vertical or Horizontal noise is present in the picture.
Possible
Solution:
Solution:
Adjust Clock and Phase in the OSD.