ASUS M5A97LER20 Manual De Usuario

ASUS M5A97 R2.0

3-19

Allows you to change the HD Azalia configuration.
[Enabled] 

Enables the High Definition Audio Azalia device.

[Disabled] 

Disables the device.

The following two items appear only when you set the HD Audio Azalia Device item to 

[Enabled].

Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97 

or high-definition audio depending on the audio standard that the front panel audio 

module supports.

[HD] 

Sets the front panel audio connector (AAFP) mode to high definition 

audio.

[AC97] 

Sets the front panel audio connector (AAFP) mode to legacy AC’97

SPDIF Out Type [SPDIF]
[SPDIF] 

Sets to [SPDIF] for SPDIF audio output.

[HDMI] 

Sets to [HDMI] for HDMI audio output.

Allows the BIOS to switch off some power at S5 to get the system ready for ErP requirement. 

When this item is set to [Enabled], all other PME options will be switched off. Configuration 

options: [Enabled] [Disabled]

The following items appear only when you set the ErP Ready to [Disabled]. 

[Power On] 

The system goes into on state after an AC power loss.

[Power Off] 

The system goes into off state after an AC power loss.

[Last State] 

The system goes into either off or on state, whatever the system state was 

before the AC power loss.

Allows you to use PS/2 device to turn on the system. This feature requires an ATX power 

supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] 

[Enabled]

[Disabled] 

Disables the PME to wake up by PCI/PCIE devices.

[Enabled] 

Allows you to turn on the system through a PCI/PCIE LAN or modem card. 

This feature requires an ATX power supply that provides at least 1A on the 

+5VSB lead.