Advantech PCA-6186 Manual De Usuario

This category allows you to select the type (or degree) of power saving 
and is directly related to the following modes:

1. HDD Power Down
2. Suspend Mode

There are four selections for Power Management, three of which have 
fixed mode settings.

When system is in suspend, video will turn off.

This determines the IRQ in which the MODEM can use.The choices: 3, 4, 
5, 7, 9, 10, 11, NA.

You can choose to turn the HDD off after one of the time intervals listed, 
or when the system is in “suspend” mode. If the HDD is in a power sav-
ing mode, any access to it will wake it up.

If you choose “Instant-Off”, then pushing the ATX soft power switch but-
ton once will switch the system to “system off” power mode. You can 
choose “Delay 4 sec.” If you do, then pushing the button for more than 4 
seconds will turn off the system, whereas pushing the button momentarily 
(for less than 4 seconds) will switch the system to “suspend” mode.

This field allows you to select the CPU THRM-Throttling rate. The 
choices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.

This item allows you to wake up the system via LAN from the remote-
host. The choices: Enabled, Disabled.

Min. Power Saving

Minimum power management., Suspend Mode = 1 hr., 
and HDD Power Down = 15 min.

Max. Power Saving

Maximum power management., Suspend Mode = 1 min., 
and HDD Power Down = 1 min.

User Defined 
(Default)

Allows you to set each mode individually.  When not dis-
abled, each of the ranges are from 1 min. to 1 hr. except 
for HDD Power Down which ranges from 1 min. to 15 min. 
and disable.