Advantech PCI-1625U Manual De Usuario
PCI-1625U User Manual
6
Chapter 2 Hardware Configuration
2.1 Initial Inspection
You should find the following items inside the shipping package:
PCI-1625U Intelligent communication card, DB62 loopback for PCI-
1625U, and ICOM CD-ROM with Industrial Communication Driver,
Utility, and Intelligent PCI communication card user manual.
1625U, and ICOM CD-ROM with Industrial Communication Driver,
Utility, and Intelligent PCI communication card user manual.
We carefully inspected the Intelligent PCI communication card series
mechanically and electrically before we shipped it. It should be free of
marks and scratches and in perfect working order on receipt.
mechanically and electrically before we shipped it. It should be free of
marks and scratches and in perfect working order on receipt.
As you unpack the PCI-1625U, check for signs of shipping damage (dam-
aged box, scratches, dents, etc.). If it is damaged or it fails to meet speci-
fications, notify our service department or your local sales representative
immediately. Also notify the carrier. Retain the shipping carton and pack-
ing material for inspection by the carrier. After inspection we will make
arrangements to repair or replace the unit.
aged box, scratches, dents, etc.). If it is damaged or it fails to meet speci-
fications, notify our service department or your local sales representative
immediately. Also notify the carrier. Retain the shipping carton and pack-
ing material for inspection by the carrier. After inspection we will make
arrangements to repair or replace the unit.
When you handle the card, remove it from its protective packaging by
grasping the rear metal panel. Keep the anti-vibration packing. Whenever
you remove the card from the PC, store it in this package for protection.
grasping the rear metal panel. Keep the anti-vibration packing. Whenever
you remove the card from the PC, store it in this package for protection.
Discharge your body’s static electric charge by
touching the back of the grounded chassis of
the system unit (metal) before handling the
board. You should avoid contact with materials
that hold a static charge such as plastic, vinyl
and styrofoam. Handle the board only by its
edges to avoid static damage to its integrated
circuits. Avoid touching the exposed circuit
connectors. We also recommend that you use
a grounded wrist strap and place the card on a
static dissipative mat whenever you work with it
touching the back of the grounded chassis of
the system unit (metal) before handling the
board. You should avoid contact with materials
that hold a static charge such as plastic, vinyl
and styrofoam. Handle the board only by its
edges to avoid static damage to its integrated
circuits. Avoid touching the exposed circuit
connectors. We also recommend that you use
a grounded wrist strap and place the card on a
static dissipative mat whenever you work with it