Advantech PCI-1625U Manual De Usuario
17
Chapter 3
3.3 Verifying Driver Installation
After you have installed your card, go to Control Panel/System/Device
Manager to look for the Device Name and COM port that are supposed to
appear after you have installed the driver.
Manager to look for the Device Name and COM port that are supposed to
appear after you have installed the driver.
You can check the card properties by double-clicking the specific device
configuration you want to see. On the General tab, you can see the loca-
tion information that means your card is installed in which PCI slot on the
board.
configuration you want to see. On the General tab, you can see the loca-
tion information that means your card is installed in which PCI slot on the
board.
Note:
If your device has not been properly installed,
there will be an exclamation mark (!) on the
device name to indicate a conflicting device. If
this is the case, just remove that device and start
the driver installation process all over again.
After driver uninstall is completed, you must
restart your system to re-assign the communica-
tion port numbers.
there will be an exclamation mark (!) on the
device name to indicate a conflicting device. If
this is the case, just remove that device and start
the driver installation process all over again.
After driver uninstall is completed, you must
restart your system to re-assign the communica-
tion port numbers.