Aspire Digital M1610 Manual De Usuario

16

Chapter 2

Power on the computer and the system will start POST (Power On Self Test) process. When the message of 
“Press DEL to enter SETUP” appears on the screen, press the key of [Delete] to enter the setup menu. 

NOTE: If the message disappears before you respond and you still wish to enter Setup, restart the system by 

turning it OFF and On. You may also restart the system by simultaneously pressing [Ctrl+Alt+Delete].

The Setup Utility main menu then appears:

The command line at the bottom of the menu tells you how to move within a screen and from one screen to 
another.

To select an option, move the highlight bar by pressing 

 or 

 then press 

. 

To change a parameter setting, press 

 or 

 until the desired setting is found.

Press 

 to return to the main menu. If you are already in the main menu, press 

 again to 

exit Setup. 

The parameters on the screens show default values. These values may not be the same as those in your 
system. 

The grayed items on the screens have fixed settings and are not user-configured.

NOTE: Due to the application of a new version of BIOS Setup program, you may find the BIOS menu is largely 

different from the former models. However, you will soon find out that this version is much more 
compact than the former ones.

XFrequency/Voltage Control

XIntegrated Peripherals

   Set User Password

F10:  Save & Exit Setup

Change/Set/Disable Password

V02.54 (C) Copyright 1985-2004, American Megatrends, Inc.

Esc: Quit                                                            KLIJ : Select Item  

XPower Management Setup

   Save & Exit Setup

XPnP/PCI Configuration

   Exit Without Saving

XAdvanced BIOS Features

   Load Optimized Defaults

XAdvanced Chipset Features

   Set Supervisor Password

Phoenix - AwardBIOS CMOS Setup Utility

XProduct Information

XPC Health Status

XStandard CMOS Features