Aspire Digital M1610 Manual De Usuario
34
Chapter 2
Power Management
The Power Management menu lets you configure your system to most effectively save energy while operating
in a manner consistent with your own style of computer use.
in a manner consistent with your own style of computer use.
The following screen shows the Power Management parameters and their default settings:
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Description
Options
ACPI Function
This item is to activate the ACPI (Advanced Configuration
and Power Management Interface) Function. If your
operating system is ACPI aware, such as Windows 98SE/
2000/Me, select Enabled.
and Power Management Interface) Function. If your
operating system is ACPI aware, such as Windows 98SE/
2000/Me, select Enabled.
Enabled
Disabled
HDD Power Down [Disabled]
Video Off Method [V/H SYNC+Blank]
Wakeup By PME [Disabled]
Wakeup By USB KB/MS [Enabled]
Wakeup By PS2 KB/MS [Enabled]
KLIJ :Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:Exit
F1: General Help F5: Previous Values F7: Optimized Defaults
HPET Mode [32-bit Mode]
Wakeup By LAN PME [Disabled]
LAN Remote Wakeup [Disabled]
Resume By Alarm [Disabled]
HPET Support [Enabled]
X Day of Month Alarm 0
X Time (hh : mm : ss) Alarm 0 : 0 : 0
X Month Alarm NA
PWRON After PWR-Fail [Former-Sts]
Power On By Ring [Disabled]
MODEM Use IRQ [AUTO]
Soft-Off by PWR-BTTN [Delay 4 sec]
Video Off in Suspend [Yes]
Menu Level X
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI function [Enabled]
Item Help
ACPI Suspend Type [S3(STR)]