Casio FX-9750GII Manual De Usuario

6-1

This chapter contains a number of graph screen shots. In each case, new data values were input in 
order to highlight the particular characteristics of the graph being drawn. Note that when you try to 
draw a similar graph, the unit uses data values that you have input using the List function. Because 
of this, the graphs that appear on the screen when you perform a graphing operation will probably 
differ somewhat from those shown in this manual.

Entering the STAT mode from the Main Menu displays the List Editor screen.

You can use the List Editor screen to input statistical data and perform statistical calculations. 

D, A, B and C to move the 

Once you input data, you can use it to produce a graph and 
check for tendencies. You can also use a variety of different 
regression calculations to analyze the data.

• For information about using the statistical data lists, see 

“Chapter 3 List Function”.

I Changing Graph Parameters

Use the following procedures to specify the graph draw/non-draw status, the graph type, and 
other general settings for each of the graphs in the graph menu (GPH1, GPH2, GPH3).

While the statistical data list is on the display, press 

(GRPH) to display the graph menu, 

which contains the following items.

• {GPH1}/{GPH2}/{GPH3} ... graph {1}/{2}/{3} drawing*

1

• {SEL} ... {simultaneous graph (GPH1, GPH2, GPH3) selection} 

You can specify the multiple graphs.

• {SET} ... {graph settings (graph type, list assignments)}

*

1

The initial default graph type setting for all the graphs (Graph 1 through Graph 3) is scatter 
diagram, but you can change to one of a number of other graph types.

This section describes how to use the general graph settings screen to make the following 
settings for each graph (GPH1, GPH2, GPH3).

The initial default graph type setting for all the graphs is scatter graph. You can select one of a 
variety of other statistical graph types for each graph.