Toshiba MA-600-1 Manual De Usuario

 

EO1-11155 

 

5.2 10-digit 7-segment Numeric Display

 

5- 4 

ERROR MESSAGE TABLE (continued) 

SH_TEND PROHIBIT 

The depressed key has been programmed with 
the status of short-tendering prohibition. 

Perform a registration operation so as not to result in 
short-tendered amount. 

SLIP OFF LINE 

Remote slip printer is off line status. 
(The remote slip printer is off or the printer cable 
is disconnected.) 

When this error message is displayed, the [ITEM 
CORR] key depression will let a confirmation message 
displayed.  By following the confirmation message, the 
[ITEM CORR] key depression will let the printer 
disconnected, meanwhile the [C] key depression will 
let the printer remain connected. 

SLIP PAPER OUT 

No slip paper is set. 

Set a slip paper on the remote slip printer. 

TENDER ONLY 

Tender only error 

The depressed key has been programmed with the 
tender-only status.  Contact your nearest TOSHIBA 
TEC representative if necessary. 

TOTAL ONLY 

Total only error 

The depressed key has been programmed with the 
total-only status.  Contact your nearest TOSHIBA TEC 
representative if necessary. 

TXBL TL COMP 

[TXBL TL] key entry compulsion error 

Depress the [TXBL TL] key prior to the sale 
finalization operation. 

VALIDATION CMP 

The operation requires a validation print. 

 

VOLTAGE ERROR 

Printer voltage error 

Contact your nearest TOSHIBA TEC representative. 

It is recommended to prepare a copy of the above table, and place it near the ECR. 
 

Amount (8 digits) 

Displays the numeric data such as amount and quantity.  When the obtained total or 
subtotal amount is 10-digit value, the X and DPT digits are also used for the amount 
display.  When no entries are under way and the Mode Lock is in the REG position, the 
current time is displayed. 

DPT (2 digits) 

Displays a Department Code of a department item just entered.  The department name is 
also displayed in the LCD display.  It remains lit when the entry of the same department 
item is repeated. 

X (1 digit) 

Displays the repeat count of the same Department or PLU item.  The count is indicated 
from the second entry on, and only the lowest digit of the repeat count will be displayed 
even when the count exceeds nine (such as “0” for 10, “1” for 11, etc.) 

 

Red 

Illuminates with the alarm buzzer generated to indicate that the last operation or 
numeric entry was an error.  To clear the error status, depress the [C] key. 

 

Green 

Blinks when the program option “slip print compulsory” has been selected.  This 
lamp does not illuminate even when a slip is set to the slip printer. 

Red 

Illuminates when the Receipt-OFF mode is declared by the [LOG/RECEIPT] (or 
[RECEIPT]) key.  In this condition, no receipts will be issued for a sale to be 
entered.  It extinguishes by depressing the [LOG/RECEIPT] (or [RECEIPT]) key 
again for Receipt-ON mode. 

Green 

Illuminates only when the Cashier Code Entry method is selected.  It illuminates 
when a cashier has signed ON.  It extinguishes when the cashier has signed 
OFF, and the message “LOG” is displayed in the LCD display instead. 

Green 

Illuminates during data communication between the ECR and a PC. 

Green 

Illuminates on a finalizing operation with the total amount displayed when the sale 
is finalized without any amount tendered. 

Green 

Illuminates when the [ST] key is depressed, indicating that the displayed amount 
is subtotal. 

Red 

When an amount tendering operation is performed, it illuminates with the change 
due displayed.