Toshiba MA-600-1 Manual De Usuario
4. PROGRAMMING OPERATIONS
EO1-11155
4.7 Footer Message Programming
4-20
4.7
Footer Message Programming
A maximum of 64 characters of Footer Message (32 characters x 2 lines) to be printed on the receipt is
programmed here. This programming is possible only when it has been selected by the program option.
programmed here. This programming is possible only when it has been selected by the program option.
Any time outside a sale
Mode
Lock:
SET
1) Menu
Tree
2) Operation
Flowchart
OPERATION
CONDITION
[Enter]
[End]
“1 MESSAGES” is
selected.
Main Menu
“2 FOOTER MESSAGE”
is selected.
is selected.
Input a message in
the 1st line.
Input a message in
the 2nd line.
[Enter]
[Enter]
[Enter]
ECR is being outside a sale and in SET mode.
Depress [1] or [Enter] key.
The 1st line message is entered and the
programmed data is printed
programmed data is printed
.
The ECR enters the 1st line input mode.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
and the display returns to Main Menu screen.
Depress [2] or [Enter] key.
The ECR enters the 2nd line input mode.
The 2nd line message is entered and the
programmed data is printed.
programmed data is printed.
A maximum of 32 one-byte or 16 two-byte
characters are input.
characters are input.
A maximum of 32 one-byte or 16 two-byte
characters are input.
characters are input.
*: To program a message in a desired line, move the cursor there with
the [
↓
] key then depress the [Enter] key.
*