Toshiba EO1-11115 Manual De Usuario
- 94 -
EO1-11115
MA-186-100 SERIES
4
5
Thread the ribbon around the ribbon
buffer, and then install the other ribbon
spool while pushing the ribbon detector
aside so that it may not catch the spool.
buffer, and then install the other ribbon
spool while pushing the ribbon detector
aside so that it may not catch the spool.
6
Turn the ribbon spool several times to re-
move the slack in the ribbon. (Select the
ribbon spool which rotates in the direc-
tion of the arrow shown in the figure.)
move the slack in the ribbon. (Select the
ribbon spool which rotates in the direc-
tion of the arrow shown in the figure.)
7
After replacing the ink ribbon, attach the
Printer Cover, then turn the Control Lock
to the REG position using the Control
Key. Depress the [NS] key to check the
print condition.
Printer Cover, then turn the Control Lock
to the REG position using the Control
Key. Depress the [NS] key to check the
print condition.
Install one of the ribbon spools as shown
in the figure while moving the ribbon de-
tector so that the ribbon is not caught.
in the figure while moving the ribbon de-
tector so that the ribbon is not caught.
Z
OFF
X
REG
SET
Spool
Ribbon detector
Ribbon
Ribbon buffer