Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Toshiba
  4. MA-600
  5. Manual De Usuario

Toshiba MA-600 Manual De Usuario

Descargar
Página de 191
4. SYSTEM START-UP PROCEDURE 
EO3-11106 
 
4. SYSTEM START-UP PROCEDURE 
 
4- 1 
4. 
SYSTEM START-UP PROCEDURE 
Case 1:  To start-up using the MA-600 terminal only 
 
RAM Clear (Chapter 5) 
 
 
All the programming operations required 
for the terminal (Chapter 6) 
 
 
Case 2:  To start-up by installing programming data from the PC 
 
CAUTION! 
< Precautions for connection to PC > 
1.  The USB cable should be connected to the ECR each time a PC sends/receives data to/from the ECR.   
 
If the USB cable is kept connected to the ECR for a long period of time, data transfer may not be 
performed properly. 
2.  When the ECR is connected to a PC with the USB cable, be sure to turn on the ECR in any mode other 
than BLIND mode.  Otherwise, the ECR may not start.   
 
RAM Clear (Chapter 5) 
 
 
PC Transmission Information Setting 
(See the next page.) 
 
 
Turn off the ECR. 
 
 
Connect a PC to the ECR via the USB 
cable. 
 
 
Turn on the ECR in any mode other than 
BLIND mode. 
 
 
DLL (Down Line Loading) the data 
programmed on the PC to the terminal. 
 
 
Perform this setting only for selecting 
any other than the default value. 
For details, refer to the MA-600 Series 
PC Programming Tool Manual.