Toshiba MA-600 Manual De Usuario

EO3-11106 

 

6.5 System Option Programming

6-19 

Setting Example) 

To set Address No. 1 with the following requirements: 
(Refer to the Address No. 1 table on the subsequent page.) 

Bit No. 1: Time NON-PRINT (SET status) 
Bit No. 3: Subtotal NON-PRINT (SET status) 

Other bits will be selected to “RESET” status. 

 

When the ECR is being outside a sale 
and in SET mode, depress the [

↓] key 

five times. 

 

The cursor is moved on to “6 OTHER”. 

Depress the [6] or [Enter] key. 

 

 

Depress the [

↓] key. 

 

The cursor is moved on to “2 SYSTEM 
OPTION”. 

Depress the [2] or [Enter] key. 

 

 

Address No. list is displayed.  Select a 
desired Address No. with the [

↑] or [↓] 

key. 

In this example, Address No. 1 
(01NON-PRINT) is selected. 

 

While  ?  is shown on the upper-right corner 
of the LCD display screen, the [?] key 
depression results in that the following 
guidance message appears on the LCD 
display. 

 

For the selected Address No., the Bit 
Numbers currently programmed are 
displayed on the 7-segment Numeric display.

With the [Enter] key depression, 
Address No. 1 setting is displayed. 

 

The [?] key depression results in that the 
following guidance message appears on the 
LCD display. 

 

(continued on the next page)