Toshiba MA-1595-1 Series Manual De Usuario
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11152
10.32 Scale Entry
10-21
10.32 Scale Entry
(The department or PLU through which scale items are entered must be a Scale-Allow
department or a Scale-Compulsory PLU)
department or a Scale-Compulsory PLU)
(1) Auto Scale Entry (without tare/tare 2/tare 3, or with tare/tare 2/tare 3 auto-subtraction)
• Through Dept: Place the item
[SCALE]
|Unit Weight| [@/FOR]
on the scale platter.
|Unit Price| [Open DEPT] -
-
-
|Open-Dept Code| [DP#] |Unit Price| [AMT]
• Through Preset-PLU: Place the item on the
([SCALE])
scale platter.
|Preset PLU Code| [PLU] -
-
-
• Through Open-PLU: Place the item on the
([SCALE])
scale platter.
|Open PLU Code| [PLU] |Unit Price| [AMT] -
-
-
NOTES: 1. When the PLU is programmed with a Tare Table No., the tare weight is automatically subtracted
from the scaled weight, and thus only the net weight is processed.
2. If the Tare 2 rate is programmed in the PLU table, a Tare 2 entry is performed when the above
Preset/Open PLU entry is performed.
(2) Auto Scale with Tare/Tare 2/Tare 3
|Tare Table No.| [TARE]
to be continued to the arrows marked with “(M)” in the above three
1 to 9
operation sequences of the Auto Scale Entry.
|Tare Table No.| [TARE]
|Tare 2 Rate| [TARE 2]
1 to 9
0 to 99.99 (%)
|Tare 2 Rate| [TARE 2]
to be continued to the arrows marked with “(M)” in the above three
0 to 99.99 (%)
operation sequences of the Auto Scale Entry.
|Tare
Weight|
[TARE 3]
to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.
OPERATION
For entry with General Weight Unit .....
1 to 9 (LB or Kg), 10 for 1/2 LB
or 100g, 11 for 1/4LB (when the
Unit Weight is different from the
General Weight Unit)
or 100g, 11 for 1/4LB (when the
Unit Weight is different from the
General Weight Unit)
(M)
(M)
(M)
to be continued to the arrows
marked with “(M)” in the above
three operation sequences of the
Auto Scale Entry.
marked with “(M)” in the above
three operation sequences of the
Auto Scale Entry.
Any value other than 0,
however, less than the
weight of scaled item
however, less than the
weight of scaled item
per Unit Weight
Max. 6 digits
per Unit Weight
Max. 6 digits
per Unit Weight
Max. 6 digits