Toshiba FS-1650-4 SERIES Manual De Usuario
– 60 –
EO1-11113
DISPLAY MESSAGE PROGRAMMING (Submode 31)
The “DISPLAY MESSAGE” here means the message to be displayed in the 16-digit dot windows of the
Operator Display panel (and Customer Display panel if the 16-digit dot windows are installed as hard-
ware option) while the Mode Lock of the terminal is in the “LOCK” position. This display message may
be used as information, commercial message, welcoming greeting, etc.
Operator Display panel (and Customer Display panel if the 16-digit dot windows are installed as hard-
ware option) while the Mode Lock of the terminal is in the “LOCK” position. This display message may
be used as information, commercial message, welcoming greeting, etc.
Any time outside a sale
Mode Lock: SET
(1 to 4;
max. 4 lines)
*
max. 4 lines)
*
(Max. 16 characters per line.
Regular-size only.)
Regular-size only.)
*
Allowed for sequential Line No. only.
Repeat for other lines.
NOTES:
1. When the option “Store Message SCROLLING DISPLAY” is selected, four lines (Line
Nos 1 to 4) are available. Even when the option “Store Message 16 CHARACTERS
HELD” is selected, four lines (Line Nos 1 to 4) are available.
In this case, refer to “Store Message Display” operation to display the respective
message lines.
HELD” is selected, four lines (Line Nos 1 to 4) are available.
In this case, refer to “Store Message Display” operation to display the respective
message lines.
2. When the “SCROLLING DISPLAY” option is selected, a maximum of 64 characters can
be entered consecutively after designating Line No.1 at first and depressing [ST] for each
line end.
line end.
3. The character must be regular-sized only.
4. The DISPLAY MESSAGE set here will also appear in the REG or MGR mode if so
designated by program option.
[AT/TL]
Character Entries [ST]
| Message Line No. | [ST]
31 [X]
OPERATION
CONDITION