Toshiba MA-1650-4 Manual De Usuario

EO1-11110

5-3

Assign No. of 1 to 16.

1: Master
2: Backup Master
3 to 16:  Satellites

This submode is available for in-line terminals (including the master and backup master terminals). It must be
operated separately on each terminal since the Terminal ID should vary from terminal to terminal. The data set in
this submode is used as the in-line address of the terminal for in-line service operations.

CONDITION

Any time outside a sale

OPERATION

Mode Lock:  SET

77  [@/FOR]

|Terminal ID No.|

Be certain not to set the same terminal ID No. to terminals on the in-line system.
If terminals with the same ID No. exist on the in-line system, malfunction may occur.

The programmed data related to in-line specifications can be read for verification purposes. A receipt is issued for
each operation with the programmed data printed.

CONDITION

Anytime outside a sale (Sign OFF required under Cashier Signing Method)

OPERATION

Mode Lock:  X or SET
(RTR Declaration is unnecessary on the Master Terminal.)

•

Terminal Connection Table ................. 169  [AT/TL]

•

Terminal ID Setting ............................. 177  [AT/TL]

1. Verifications listed in the Operator’s Guide of the standalone level are also available on all the

terminals of the in-line system.

2. The verification of Terminal Connection Table can be executed on the Satellite Terminals after

the DLL operation.

ex.) To assign Terminal ID No. 4 to the terminal used as

a Satellite Terminal of the in-line system:

Mode Lock:  SET, enter 77, depress [@/FOR].

Enter 4, depress [AT/TL]

  TEC STORE
    1343 PEACH DRIVE
     PHONE : 87-6437

Open  8:00am to 7:00pm
Closed: every Wednesday

19-12-1994  MON #1

    P77
                      04

            0011 14:16TM

5.3  VERIFICATION OF PROGRAMMED DATA RELATED TO IN-LINE SPECIFICATIONS