Toshiba MA-1650-4 Manual De Usuario

EO1-11110

10-22

10.31  SCALE ENTRY

OPERATION

(The department or PLU through which scale items are entered must be a Scale-Allow
department or a Scale-Compulsory PLU)

(1)

Auto Scale Entry (without tare/tare 2/tare 3, or with tare/tare 2/tare 3 auto-subtraction)

(M)

•

Through Dept:  Place the item

|Unit Weight|  [@/FOR]

•

Through Dept:

  on the scale platter.

per Unit Weight

per Unit Weight

•

Through Preset-PLU: Place the item on the

([SCALE])

scale platter.

(M)

|Preset PLU Code|  [PLU]

- - -

- - -

•

Through Open-PLU: Place the item on the

([SCALE])

scale platter.

(M)

|Open PLU Code|  [PLU]   |Unit Price|  [AMT]

per Unit Weight

- - -

|Unit Price|  [Open DEPT]

|Open-Dept Code|  [DP#]   |Unit Price|  [AMT]

For entry with General Weight Unit

.....

1 to 9 (LB or Kg), 10 for 1/2 LB
or 100g, 11 for 1/4LB (when the
Unit Weight is different from the
General Weight Unit)

1. When the PLU is programmed with a Tare Table No., the tare weight is automatically subtracted

from the scaled weight, and thus only the net weight is processed.

2. If the Tare 2 rate is programmed in the PLU table, a Tare 2 entry is performed when the above

Preset/Open PLU entry is performed.

(2)

Auto Scale with Tare/Tare 2/Tare 3

|Tare Table No.|  [TARE]

to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.

|Tare Table No.|  [TARE]

|Tare 2 Rate|  [TARE 2]

to be continued to the arrows
marked with “(M)” in the above
three operation sequences of the
Auto Scale Entry.

|Tare 2 Rate|  [TARE 2]

to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.

|Tare Weight|  [TARE 3]

to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.

1 to 9

1 to 9

0 to 99.99 (%)

0 to 99.99 (%)

Any value other than 0,
however, less than the
weight of scaled item