Casio TE-M80 Manual De Usuario

E

5

Remove the journal paper from the
take-up reel.

6

Press the printer open key and open
the platen arm.

7

Remove the core of the paper.

8

Load new paper following the instruc-
tions “1. To load journal paper”.

CAL

REG

OFF

RF

PGM

X

Z

1

Pressing down the printer open key.

2

 Open the platen arm.

3

Ensuring the paper is being fed from
the bottom of the roll, lower the roll
into the space behind the printer.

4

Put the leading end of the paper over
the printer.

5

Close the platen arm slowly until it
locks steadily.

◗

1

In case of defining the printer as
receipt printer, follow steps 1 through
5 of  “To load journal paper”.

2

Pass the leading end of the receipt
paper through the paper outlet of the
printer cover.

3

Tear off any excess paper.

◗

1

In case of defining the printer as
journal printer, follow steps 6 through
7 of  “To remove a journal paper”.

◗

1. Never touch the printer head and platen.
2. Unpack the paper just before your use.
3. Avoid heat/direct sunlight.
4. Avoid dusty and humid places for storage.
5. Do not scratch the paper.
6. Do not keep the paper under the following

circumstances: High humidity and tempera-
ture/direct sunlight/contact with glue, thin-
ner or a rubber eraser.

Default printer definition is journal printer.
To print receipts, please refer to 1-7-3 on
page 24 to switch the printer for receipt or
journal.

Options: Roll paper •••  P-5880T

6

Remove the printer cover by lifting up
the back.

7

Roll the paper onto the take-up reel a
few turns.

8

Set the left plate of the take-up reel
and place the reel into the register.

9

Press the 

l

 key to take up any

slack in the paper.

0

Replace the printer cover slowly.

1

Remove the printer cover by lifting up
the back.

2

Press the 

l

 key until approximately

20cm of the paper is fed from the
printer.

3

Cut off the roll paper.

4

Remove the take-up reel from the
printer and take off the left plate of the
reel.

platen arm

printer cover