KYOCERA 205c.255c Manual De Usuario

9-24

Setup, Registration, and User Management > System Menu

Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.

Value

: Quick Recovery, Energy Saver

NOTE: If the optional Gigabit Ethernet Board is installed, Energy Saver cannot be 
specified.

Set whether to use the Energy Saver mode for the following functions individually:
Network
USB Cable
Card Reader
RAM Disk
FAX

Value

: Off, On

NOTE: When the machine enters Energy Saver, the data stored in the RAM disk will be 
deleted. In addition, the machine does not wake from sleep mode when it receives print 
data from a PC connected by USB cable. Also, the ID card cannot be recognized.

If an error occurs during processing, processing stops to wait for the next step to be taken by 
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time 
elapses. For details, refer to Responding to Error Messages on page 10-13.

Value

: Off, On

Set amount of time before entering the Low Power mode.

Value

: 1 to 240 minutes (1 minute increments).

If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.

Value

: 5 to 495 seconds (every five seconds)

NOTE: If you select [Off] for [Auto Panel Reset], the time display does not appear.

Set amount of time before entering Sleep.

Value

: 1 to 240 minutes (1 minute increments)

NOTE: If you select [Off] for [Auto Sleep], the time display does not appear.

Set the period after which the machine reverts to Normal mode when it has been set to 
Interrupt Copy mode and then left unused.

Value

: 5 to 495 seconds (every five seconds)

If you select [On] for Auto Error Clear, set the amount of time to wait before automatically 
clearing errors.

Value

: 5 to 495 seconds (every five seconds)

NOTE: If you select [Off] for [Auto Error Clear], the time display does not appear.