Country Home Products C123E-CHP Manual De Usuario

 

 

 

 

CHIPPER 

CHIPPER HOPPER 

4 EA – 5/16-18 X ¾” CARRIAGE BOLTS 

TOW BEAM 

HITCH PLATE 

3 EA – 5/16-18 X 1” HHCS 

PARTS BOX 

GLASSES 

7 EA – 5/16-18 NYLOCK NUTS 

 

OWNER’S MANUAL 

4 EA – 5/16 USS FLATWASHERS 

 

ENGINE MANUAL 

1 EA – ¼-20 X 1 1/4” U-BOLT 

 

BOLT BAG 

2 EA – ¼-20 NYLOCK NUTS 

 

KNIFE GAUGE 

2 EA – ENGINE KEY 

 

 
•  1/2” Wrench or Socket - 2 required 
 

STEP I - UNPACKING AND CHECKING CONTENTS 
 

1.  Remove the carton and place the unit on its wheels. 
2.  After unpacking the shipping carton, compare the contents with the list above. 
3.  If any parts are missing or damaged, contact Country Home Products at 800-376-9637. 
4.  Assembly should be done on a clean, level surface. 

 

 
1.  Assemble chipper hopper (item #20, pg 30) to machine using four each 5/16”-18 x 3/4” carriage bolts, 5/16”-18 

nylock nuts and 5/16” flatwashers from the bolt bag.  Put head of bolt inside hopper with threads sticking out.  
Tighten all hardware with a ½” wrench. 

2.  Attach the tow beam (item #2, pg 28) to the axle of the machine by putting the u-bolt (item #26, pg 28) from the 

bolt bag around the axle and through the two holes in the tow beam per the picture on page 29.  Secure with 
two ¼-20 nylock nuts. 

3.  Attach the center of the tow beam to the front of the frame as shown on page 29 with a 5/16-18 x 1” HHCS and 

a 5/16-18 nylock nut. 

4.  Attach the hitch plate (item # 3, pg 28) to the tow beam as shown on page 29 with two 5/16-18 x 1” HHCS (item 

#18, pg 28) and two 5/16-18 nylock nuts (item #19, pg 28). 

5.  Service the engine as per the engine manual. 
6.  Lubricate both rotor bearings every 8 hours of operation with multi-purpose grease.  Also check the bearing 

collar set screws regularly to be sure they are tight.  If they are loose, reset them with Loctite 243, obtainable at 
any hardware store. 

 
 

 

10