Cisco NM-4T= Manual De Usuario
Understanding the 4−Port Sync Serial Network
Module (NM−4T)
Module (NM−4T)
Document ID: 7264
Introduction
Prerequisites
Requirements
Components Used
Conventions
Product Number
Features
Platform Support
Configuration
Related Information
Prerequisites
Requirements
Components Used
Conventions
Product Number
Features
Platform Support
Configuration
Related Information
Introduction
The four−port synchronous (sync) serial network module (NM−4T) has four DB−60 ports and provides a data
rate of 8 Mbps on port 0, 4 Mbps each on port 0 and port 2, or 2 Mbps on all four ports simultaneously. The
NM−4T network module only supports sync mode. The DB−60 ports on the NM−4T network module support
the Cisco 60−pin "5−in−1" cables used on the Cisco 2500 and Cisco 7000 series routers.
rate of 8 Mbps on port 0, 4 Mbps each on port 0 and port 2, or 2 Mbps on all four ports simultaneously. The
NM−4T network module only supports sync mode. The DB−60 ports on the NM−4T network module support
the Cisco 60−pin "5−in−1" cables used on the Cisco 2500 and Cisco 7000 series routers.
Prerequisites
Requirements
See the Platform Support section of this document.
Components Used
See the Platform Support section of this document.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.