Casio KL-7400 Manual De Usuario
E
54
Message
See page:
Cause and Action
Message
See page:
Cause and Action
NO DATA!
NO INPUT TEXT!
NOT ENOUGH
DIGITS!
DIGITS!
PENDING DATA WILL
BE LOST
CONTINUE? SET/ESC
BE LOST
CONTINUE? SET/ESC
• You are trying to recall or
delete memory data when
there is no data in memory.
there is no data in memory.
➜ Store data in memory before
performing the current
operation.
operation.
• You are attempting to
perform a paste operation
when there is no text copied.
when there is no text copied.
➜ Copy text first.
• You are attempting a print or
• You are attempting a print or
preview operation when
there is no text input.
there is no text input.
➜ Input text before printing or
previewing.
• You are attempting to
perform a copy operation
when there is nothing input.
when there is nothing input.
➜ Input text first.
• You are trying to print a bar
• You are trying to print a bar
code that does not have the
required number of digits.
required number of digits.
➜ Re-input the correct number
of digits.
• To delete the text, press SET.
• If you do not want to delete
• If you do not want to delete
the text, press ESC.
45
40
18, 23
40
35
—
PRINT ERROR!
CHECK THE TAPE
CARTRIDGE!
CHECK THE TAPE
CARTRIDGE!
• The tape became jammed
during printing.
➜ Turn off the printer and
remove the tape cartridge.
Next, remove the jammed
tape.
Next, remove the jammed
tape.
• There is something stuck in
the auto tape cutter.
➜ Turn off the printer and
remove the tape cartridge.
Next, remove whatever is
stuck in the auto tape cutter.
Next, remove whatever is
stuck in the auto tape cutter.
• There is dirt, tape pieces, or
other foreign matter stuck to
the rubber roller.
the rubber roller.
➜ After removing the foreign
matter from the rubber roller,
clean the rubber roller.
clean the rubber roller.
• The printer is being used in
an area that is exposed to
direct sunlight or some other
source of bright light, causing
malfunction of its optical
sensor.
direct sunlight or some other
source of bright light, causing
malfunction of its optical
sensor.
➜ Turn off the printer and then
move it to a location that is
not exposed to bright light.
not exposed to bright light.
13
49
—