Muratec IF-200 Manual De Usuario

 

Enter the telephone number of the phone 
line to be attached to the IF-200. 

 

 

If you would like verification that your IF-
200 is configured correctly, press YES and 
the IF-200 will print a completed 
worksheet. Otherwise, press NO to see the 
Main screen. 
 

 

Confirm the connection of the supplied RJ-
45 ethernet cable to the LAN port on the 
rear of the IF-200. You should see a green 
indicator light on the LAN port. Press any 
key when complete. 

 

If you pressed YES, the IF-200 sends a test 
FAX to Muratec. 

 

After the e-mail has been sent, press any 
key to go to the Main screen. You may then 
press the Receive key to check for an e-
mail confirmation from Muratec. The IF-
200 automatically checks for mail in 15 
minutes. 

 

 

 

Main screen (ready mode) of the IF-200.  
To change an incorrect entry after this 
process is complete, press SETUP from the 
Main screen. Move the cursor to the 
ISP/Mailbox line and press EDIT. 

 
For an overview of all the IF-200 Menu choices, refer to the IF-200 Menu Chart in the 
appendix. 
 

3.4.  Phone Book 
The phone book is a list of the e-mail addresses and phone numbers to which you will be 
sending faxes. For each phone book entry, the IF-200 asks you for the person or company 
name, their e-mail address, and their fax number. The IF-200 assigns each phone book 

IF-200 Phone#: 
_ 
 
  OK                        ESC 

Print IF-200 
worksheet detailing 
completed ISP info? 
  YES                        NO 

Connect LAN cable to 
the LAN port on the 
IF-200 
      <Press any key> 

IF-200         vx.xx 
 
PHONE- 

BOOK

SETUP

Send test FAX and 
registration to 
Muratec 
YES  

NO 

Sending test FAX 
and registration to 
Muratec 
    ****Please Wait****

 

Test e-mail sent! 
Use Receive key to 
Check for new e-mail 

<Press any key>