OKI 5250 Manual De Usuario

|

Handbook

• To enter numbers, use the numeric keypad (press once)
• To enter spaces, use the Space One Touch key
• To enter hyphens (-), use the Hyphen key
• To enter alphabetical characters, locate the character

you want on the numeric keypad.

• Press that key repeatedly until the character appears on

the display.

• To enter a unique character, press the 0/Unique key

repeatedly until the character you want appears.
The following characters are available: ! # & ‘ ( ) * + , -
. / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.

• To enter two successive letters/numbers on the same

key, press the No 

© key to move to the next character.

Move the cursor to make corrections, press the Yes 

§

and No 

© keys

6 Press Start. The display shows

NO=<LOCATION>.

7 Press Start. The display shows 

PROGRAMMING, then

DIALING, and the fax machine dials the number and sends
the fax.

If your fax machine is set to the manual receive [TEL] mode,
it treats all incoming calls as voice conversations, and does
not automatically receive faxes.

To receive a fax while in manual receive mode:

 1 When your telephone or fax machine rings, pick up the

telephone handset connected to it. If a person is on the
line, carry on your conversation.

 2 If a remote fax machine is on the line, or if a person

wishes to fax you a document after a conversation, press
the Start key.

 3 When the 

RECEIVING message appears on the display,

hang up the handset.

 4 After you receive the fax, a long beep tells you that the

transmission was successful.