OKI 5250 Manual De Usuario
|
Handbook
85
Sending to a Group
!
These instructions assume that you have the default
setting for User Function 18 (FEEDER) engaged. If
you have the MEMORY setting engaged, skip step 4.
setting for User Function 18 (FEEDER) engaged. If
you have the MEMORY setting engaged, skip step 4.
1 Load your document(s).
2 Press the Select Function key.
3 Press the 2/BROADCAST
« FEEDER TX One Touch
key.
The display shows
The display shows
FEEDER TX.
4 Press No
©.
5 Press the # key, then the two-digit number (01 to 10) for
the group.
6 Press No
© twice.
7 Press the Start key.
The fax unit scans the document(s) into memory and begins
transmitting the message.
transmitting the message.
7 After you have completed your selection by pressing Yes
§ or No ©, the display shows
SELECT LOC.
Continue to add or delete locations from your group.
8 When you are finished programming your group, press the
No
© key.
The display shows
LOCATION PROGRAMMING.
9 To program another group, go back to Step 3. If you are
finished, press the Select Function key.