Canon MPC600F/400 Manual De Usuario
1-2
Standby Display
The standby display differs depending on which mode is selected. When the machine is turned on, the Copy
Mode standby display appears. You can switch Copy Mode to Fax Mode by pressing
Mode standby display appears. You can switch Copy Mode to Fax Mode by pressing
Fax
.
The standby display in Fax Mode is as follows:
• The standby display in Copy Mode and Scan Mode are,
→
Reference Guide.
■
Fax Mode
D.T.
Polling
R
01
02
03
04
05
06
07
08
09
Coded Dial
Hook
Redial/Pause
Hook Button
Engages or
disengages the
telephone line.
Engages or
disengages the
telephone line.
Coded Dial Button
Press this button and a two-
digit code to dial a pre-
registered fax/telephone
number or group.
Press this button and a two-
digit code to dial a pre-
registered fax/telephone
number or group.
Redial/Pause Button
Redials the last number that was dialled with the numeric
buttons. Also enters pauses between or after the fax/
telephone number when dialling or registering numbers.
Redials the last number that was dialled with the numeric
buttons. Also enters pauses between or after the fax/
telephone number when dialling or registering numbers.
R Button
Dials the outside line access number when
the machine is connected through a
switchboard (PBX).
Dials the outside line access number when
the machine is connected through a
switchboard (PBX).
Polling Button
Polls another fax machine.
Polls another fax machine.
D.T. Button*
Confirms the dial tone when dialling a fax/telephone number
* This feature is only available for some countries
Confirms the dial tone when dialling a fax/telephone number
* This feature is only available for some countries
One-Touch Speed Dial Buttons
Dial fax/telephone numbers pre-registered for one-touch speed dialling
Dial fax/telephone numbers pre-registered for one-touch speed dialling
20/12 2002 FRI 15:30
FaxOnly
STANDARD
Receive Mode
Image Quality
Date & Time