Lanier 2002 Manual De Usuario
Dial Registration
4 - 22
Facsimile Programming
Entering
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 5 or scroll down to the Batch TX menu and
press YES.
press YES.
3
Press the One-Touch Key you wish to use.
4
Enter the time at which the batch should be
transmitted and press YES to accept.
transmitted and press YES to accept.
•
This screen confirms your entry.
5
Press the START key to enter this information into
memory, or press NO to exit.
memory, or press NO to exit.
Edit/Deleting
1
If you wish to change any entry, a screen allows you to accept or change.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
either EDIT or DELETE and then proceed with the
needed changes.
DIAL REGISTRATION?
YES / or 1-5
5 BATCH TX?
-SELECT REGIST.KEY-
OK=YES
ONE-TOUCH 25
TX TIME=_0:00
OK=YES
*SET ONE-TOUCH 25
23:00
-SELECT REGIST. KEY-
(COMPLETE=NO)
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-