Mocomtech CDM-570L Manual De Usuario

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

IP Module Ethernet Interface Overview 

MN/CDM570L.IOM 

•  Configuration backup and restore via FTP 

•  Event Logging to capture all IP Module activity 

•  Detailed Statistics of IP traffic 
•  IGMP support for multicast 

•  CDM-550 Emulation Mode 

•  Static IP routing for unicast and multicast 
•  easyConnect™ Mode  

In Router Mode operation, the 10/100BaseT Ethernet Interface is used for routing IP 
traffic to be transmitted over the satellite or routed to another device on the local LAN. In 
easyConnect

™ Mode, the Ethernet Interface is used to forward IP and non-IP traffic over 

the satellite. Local or remote management of all CDM-570/570L and IP Module 
functions is also available via Telnet, HTTP, or SNMP. 

The CDM-570/570L IP-Centric Modem may be configured, operated and monitored 
using any of the following methods: 
 

Front Panel 

Local - Keypad 

ALL 

IP Address/Subnet 
Mask only 

Chapter 6 

Serial Remote 
Control 

Local - Serial RS-232/RS-485 
via Remote Control Port  

ALL IP 

Address/Subnet 

Mask only 

Chapter 14 

Serial Command 
Line Interface (CLI) 

Local - Serial RS-232 via 
Console Port  

ALL ALL 

Chapter 

17 

Telnet 

Local or remote - Ethernet via 
10/100 BaseT Traffic interface 

ALL ALL 

Chapter 

17 

Web Server 

Local or remote - Ethernet via 
10/100 BaseT Traffic interface 

ALL ALL 

Chapter 

18 

SNMP 

Local or remote - Ethernet via 
10/100 BaseT Traffic interface 

ALL ALL 

Chapter 

19 

The IP Module uses ‘flash memory’ technology internally, and new firmware can be 
uploaded to or from an external PC by FTP. This makes software upgrading very simple, 
and updates can now be sent via the Internet, E-mail, or on disk. The upgrade can be 
performed without opening the unit or having to be in the same physical location. 

15–2