Mocomtech CDM-570L Manual De Usuario

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

Appendix F 

MN/CDM570L.IOM 

ENT) 

 
The user is prompted to edit the transmit attenuation.  This is accomplished by selecting 
the digit to be edited, using the ◄ ► keys.  The value of the digit is then changed using 
the ▲ ▼ keys.  The user then presses ENT. 

 KST Tx Output: 
 Off  On  Warm  (

NT) 

 
The user is prompted to select either ON, OFF, or WARM using the ◄ ► keys, then 
press ENT.   

 

•  WARM is OFF, if COLD. 

•  WARM is ON, if warm and NO FAULTS 
•  FAULTS present, stays WARM and OFF indefinitely 

 HPA:  State  Fault-Logic 
                (

NT) 

 
The user may select a parameter using the 

keys, then press ENT. 

NT) 

 
 
 

Note: If the HPA power is Off, it cannot report errors, answer messages, provide serial 
numbers, etc. 

NT) 

 
The user may select from the options shown, using the ◄ ► keys, then press ENT. 
This controls whether or not HPA fault will activate the SUMMARY FAULT RELAY. 

F–19