Black Box MWU2000-V35 Manual De Usuario

 

 

 
6. For two 2.048Mbps Wireless Modems to communicate with one another, one side of the 
link must be configured in Master mode, with the unit at the other side of the link configured 
in Slave mode. Units are shipped from factory with a default setting of Slave. In an E1 or 
T1 configuration, the Master modem must be located on the same side as the E1 or T1 master 
(of the external equipment that provides the system clock). 
 
Other basic parameters that should be configured for a quick start are:  
 

•

  The clock rate (V3.5/RS-530/X.21 only). Both units must use the same clock rate. 

 

•

  Select channels (Fractional E1/T1 only). Both units must use the same channels. 

 

•

  Select channels with echo cancellation (Fractional E1/T1 with voice channels only). 

Both units must be configured to use echo cancellation in the same channels.

 

 

 

1. From the Main menu, select 1 to access the Parameters menu. 
 
2. From the Parameters menu, type 2 to select the MCP Parameters menu. 
 
3. From the MCP Parameters menu. type 2. The Master-slave sub-menu opens. 
 
4. Select the required configuration as follows: 

 

•

 Type 0 for master 

 

•

 Both units must be configured to operate at the same required clock rate. For 

E1 and T1 the rate is set in factory. 

 
1. From the Main menu, select 1 to access the Parameters menu. 
 
2. From the Parameters menu, type 1 to select the LIU (Line Interface Unit) Parameters menu. 
 
3. From the LIU Parameters menu, type 5. The V.35/RS-530/X.21 sub-menu opens.