Cisco Systems DPQ3212 Manual De Usuario
4019777 Rev B
33
Having Difficulty?
Having Difficulty?
Common Troubleshooting Issues
I don't understand the front panel status indicators
See Front Panel LED Status Indicator Functions (on page 35), for more detailed
information on front panel LED status indicator operation and function.
information on front panel LED status indicator operation and function.
The modem does not register an Ethernet connection
Verify that your computer has an Ethernet card and that the Ethernet driver
software is properly installed. If you purchase and install an Ethernet card,
follow the installation instructions very carefully.
software is properly installed. If you purchase and install an Ethernet card,
follow the installation instructions very carefully.
Verify the status of the front panel LED status indicators.
The modem does not register an Ethernet connection after connecting to a hub
If you are connecting multiple PCs to the cable modem, you should first connect the
modem to the uplink port of the hub. The LINK LED of the hub will illuminate
continuously.
modem to the uplink port of the hub. The LINK LED of the hub will illuminate
continuously.
The modem does not register a cable connection
The modem works with a standard 75-ohm RF coaxial cable. If you are using a
different cable, your cable modem will not function properly. Contact your service
provider to determine whether you are using the correct cable.
different cable, your cable modem will not function properly. Contact your service
provider to determine whether you are using the correct cable.
There is no dial tone when I lift the telephone handset
Your telephone wiring may be connected to the wrong RJ-11 port on the cable
modem. The cable modem has two telephone ports. Verify that you are
connected to the correct telephone port.
modem. The cable modem has two telephone ports. Verify that you are
connected to the correct telephone port.
There may be a problem with your telephone set. Use a different telephone set
and listen to hear dial tone.
and listen to hear dial tone.
There may be a problem with your home telephone wiring. Use a telephone and
connect directly to the same RJ-11 port on the back of the unit. If the dial tone is
working here but does not work at other locations in the home, a professional
may need to diagnose and repair a problem with your telephone wiring.
connect directly to the same RJ-11 port on the back of the unit. If the dial tone is
working here but does not work at other locations in the home, a professional
may need to diagnose and repair a problem with your telephone wiring.
Verify that the phone company has removed the previous telephone service from
your home telephone wiring.
your home telephone wiring.
Your telephone service may not be enabled from your cable telephony service
provider. Contact your cable telephony service provider for more information.
provider. Contact your cable telephony service provider for more information.