3com MIC-3365 Manual De Usuario

Descargar
Página de 15
 
Installing the 3Com Impact Digital Modem
 
3
 
The 3Com Impact digital modem has an RS-232-C 
asynchronous interface port that operates at data rates of up 
to 115.2 Kbps. Some computers may need additional 
hardware or driver software for reliable operation.
 
IBM PCs and Compatible Computers
 
An IBM
 
 
 PC or compatible computer must have a buffered 
UART (universal asynchronous receiver/transmitter) chip, called 
the 16550 UART, to operate at 115 Kbps. Under Microsoft
 
 
 
Windows
 
 
, run the Microsoft Diagnostic Program (
 
msd
 
) at the 
DOS prompt and select COM Ports within msd. The UARTs 
present in your computer are listed under each COM port. 
To operate at the maximum data rate, install an enhanced 
16550 UART expansion card in your PC. If you have a 
nonupgradable PC with a slower UART (16450 or 8250), the 
3Com Impact digital modem can operate at lower data rates, 
since it automatically adjusts to the PC serial COM port data 
rate. The COMM.DRV driver for Windows 3.1 only allows data 
rates of up to 38.4 Kbps. If you have a UART that supports 
higher rates than this (for example, 16550), you must install the 
TurboCom
 
 
 
 
enhanced driver that is provided with the digital 
modem.
 
Apple Macintosh Computers
 
Motorola
 
 
 
 
68XXX-based Macintosh
 
 
 
 
systems support a 
maximum asynchronous serial port data rate of 57.6 Kbps. 
Power Macintosh
 
 
 computers may operate at higher serial 
port data rates. 
 
Installing the 3Com Impact Digital Modem
 
Follow the appropriate procedure for installing the
3Com Impact digital modem in your computer. Refer to 
Figure 1 during the installation procedure.
 
09-0700-002  Page 3  Sunday, December 22, 1996  3:40 PM