Billion Electric Company 7100SV Manual De Usuario

31 

This screen contains settings for configuring VoIP SIP module. 

SIP: Enable/Disable to use SIP as VoIP call signaling protocol. 

SIP Registration:  Enable/Disable to register a SIP account in the SIP server (refer Service Provider 
section below) or not. 

LocalSIPPort: Enter the local SIP port which device listens incoming request. (range from 5000 to 65535, 
default value is 5060) 

MediaBasePort: It is known as RTP port, provide the based value from the media (RTP) ports that are 
assigned for various endpoints and the different call sessions that may exist within an end-point. (range 
from 5000 to 65535, default value is 5000) 

UserID: This parameter holds the registration ID of the user within the SIP registrar. 

Password: This parameter holds the password used for authentication within SIP registrar. 

AuthorizationUserID: Same as UserID. 

DisplayName: This parameter will be appeared on the Caller ID. 

G.711U:  Set the priority of voice compression to be used in the voice codec. Priority 1 owns the first 
priority and so on. 

G.711A: Set the priority of voice compression to be used in the voice codec.