Cisco Systems LAIRCTVM5K9 Manual De Usuario
The AP may have an older SSC hash, either from an old installation or joining other controllers. It is
possible to configure the WLC to not validate SSC, allow APs to join the vWLC, then re−enabling the
validation again.
possible to configure the WLC to not validate SSC, allow APs to join the vWLC, then re−enabling the
validation again.
(Cisco Controller) >configure certificate ssc hash validation disable
•
Perform the test capwap <erase/restart> command in order to clear AP capwap settings and initiate
join process.
join process.
APf866.f267.67af#test capwap erase
APf866.f267.67af#test capwap restart
restart capwap
APf866.f267.67af#
*Jun 9 12:27:22.469: %DTLS−5−SEND_ALERT: Send FATAL : Close notify Alert to
10.10.11.20:5246
*Jun 9 12:27:22.525: %WIDS−6−DISABLED: IDS Signature is removed and disabled.
*Jun 9 12:27:22.529: %LWAPP−3−CLIENTERRORLOG: LWAPP LED Init: incorrect led
state 255
*Jun 9 12:27:22.897: Starting Ethernet promiscuous mode
*Jun 9 12:27:32.903: %CAPWAP−3−ERRORLOG: Go join a capwap controller
*Jun 9 12:27:23.000: %CAPWAP−5−DTLSREQSEND: DTLS connection request sent
peer_ip: 10.10.11.20 peer_port: 5246
*Jun 9 12:27:23.276: %CAPWAP−5−DTLSREQSUCC: DTLS connection created
successfully peer_ip: 10.10.11.20 peer_port: 5246
*Jun 9 12:27:23.276: %CAPWAP−5−SENDJOIN: sending Join Request to 10.10.11.20
•
As part of the mobility configuration, if there is a virtual controller in the network, the administrator
needs to add a hash key of the virtual controller in all the peer controllers. If adding another peer
controller, the consideration is to add the hash (shown in the SSC output above) to the mobility group
member.
needs to add a hash key of the virtual controller in all the peer controllers. If adding another peer
controller, the consideration is to add the hash (shown in the SSC output above) to the mobility group
member.
(Cisco Controller) >config mobility group member add 10.10.11.30
(Cisco Controller) >config mobility group member hash 10.10.11.30
bd7bb60436202e830802be1e8931d539b67b2537
•
Related Information
FlexConnect Feature Matrix
•
Cisco LAP Documentation
•
Flex 7500 Wireless Branch Controller Deployment Guide
•
Technical Support & Documentation − Cisco Systems
•
Contacts & Feedback | Help | Site Map
© 2012 − 2013 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
© 2012 − 2013 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
Updated: Sep 04, 2012
Document ID: 113677