Black Box VX-HDMI-POE-UTX Manual De Usuario
724-746-5500 | blackbox.com
Page 8
Chapter 1: Specifications
1. Specifications
Technical Specifications
Approvals
FCC, TUV, CE, UL
®
, CSA, RoHS, WEEE
Bandwidth
120 Mbps maximum
Default IP Address
169.254.x.x (with no DHCP address)
NOTE: To find the IP address of any receiver, simply
NOTE: To find the IP address of any receiver, simply
connect to monitor and power up to get IP
address. To find the IP address of any other
receiver or transmitter, use Telnet to connect to
any device in the system and use a “node_list”
command or connect with the serial interface.
address. To find the IP address of any other
receiver or transmitter, use Telnet to connect to
any device in the system and use a “node_list”
command or connect with the serial interface.
Distance
From CPU to TX: 16 ft. (5 m) maximum, HDMI;
Between TX and RX: 328 ft. (100 m)* maximum
*NOTE: Use a network switch to get greater distances.
Between TX and RX: 328 ft. (100 m)* maximum
*NOTE: Use a network switch to get greater distances.
Efficiency Level
Level IV
Heat Dissipation
3.41 BTU/hr.
HDCP
Supported
Latency
2 frames (33 ms) maximum
Leads Supported
HDMI video and RS-232
MTBF
90,000 hours
User Controls
(1) 16-position rotary selection switch,
(2) Function buttons: (1) F1, (1) F2
(2) Function buttons: (1) F1, (1) F2