Royal Sovereign RSS-1050 Manual De Usuario

   

  Location control device is used when the edges of the lamination are unjustified. 
  As the drawing shows, when the alignment knob is turned clockwise, the upper film is

 to left. Once proper alignment is reached, turn the Locking Nut tight against the Alignment
 knob so the adjustment is set.

 can adjust it, to some extent, and make wrinkles straighten from Anti-Wrinkle Part of the

  Tension of film can be controlled depending on the state of lamination, but basically you

 heat shoe.  To increase the tension on the film, turn the knob clockwise.
  To lower the tension, turn the handle counter clockwise. If lamination is curved upward,
 it means that tension of upper film is high.  In this case, it can be controlled by raising

 moved to right. On the contrary, when the handle is turned counter-clockwise, it is moved

 apply the method in reverse.

 tension of lower film or lowering tension of upper film. If lamination is curved downward,

Alignment Knob.

Locking Nut

Tension Control Knob

필 름

주 름 방 지 부

필 름

열 판

Film

Shoe-Heater

Film

Anti-Wrinkle
device

 

- 6 -