SEAL 600-C Manual De Usuario

 

 

11

  6 O O-C

1

0

2

3

4

5

6

7

8

9

10

(Reset Up)

Reset Power After
 Emergency Stop

1.  Air Regulator Knob: Adjusts the downward 

pressure of the top roller. Turn clockwise to 

increase the pressure. 

2.  Air Pressure Gauge: Indicates the PSI reading for 

the downward pressure of the top main roller. The 
standard setting for the normal operation is 35-55 

PSI.  

3.  Roller Up/Down Switch (Front, Top): Press UP to 

raise the roller. Press DOWN to lower the roller. 
Reset this switch (press UP, then DOWN) after 

pressing an Emergency Stop. 

4.  Speed Adjustment Knob: Use this knob to adjust 

the speed of the roller rotation. Turn the knob 
clockwise to increase the speed, and counter-

clockwise to decrease the speed. 

5.  Motor ON/OFF Switch: Press UP to start the 

roller rotation, the switch will be illuminated. Press 
the switch DOWN to stop the roller rotation. In the 

OFF position, the footswitch can be used for roller 
rotation. 

6.  Power Indicator Light: This light is illuminated 

when the power is turned ON and all functions are 

then operable. 

7.  Stand-by On/Off Switch: Press the switch UP to 

turn on the laminator. Press this switch DOWN to 
put it on Standby. In Standby, the laminator power 

is still on, but all functions are disabled. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 4. Front Control Panel