Linksys WIRELESS PRINTSERVER USB 2.0 WPS54GU2-EU Manual De Usuario

3

Chapter 2: Getting to Know the PrintServer

The PrintServer’s ports are located on the back panel.

The Power port is where you will connect the power adapter.

The Parallel port is where you will connect the parallel printer to the PrintServer.

The USB port is where you will connect the USB printer to the PrintServer.

The USB icon (right) designates a USB port. The PrintServer comes with a USB 
cable. One end has a rectangular connector called Type A. The other end has a 
square connector called Type B. The USB cable’s Type A end connects to the 
PrintServer, and the Type B end connects to the printer. 

The LAN port is where you will connect the PrintServer to your wired network.

Use the Reset Button to reset the PrintServer to its factory defaults or print a test page. The 
instructions are provided on the right side of this page.

 

Important: Resetting the PrintServer will 

erase all of your settings and replace them 

with the factory defaults. Do not reset the 

PrintServer if you want to retain the settings.

To reset the factory default settings
1. Unplug the PrintServer.
2. Press and hold the Reset button. While pressing the 

button, plug in the PrintServer.

3. If you continue pressing the button for 10 seconds, 

the PrintServer will be reset to factory defaults.

To generate a diagnostic print-out
1. Ensure that both the PrintServer and the printer 

attached to the Printer port are ON.

2. Press the Reset button, and hold it in for 2 seconds.
3. The test page, which lists the current settings, will 

be printed. 

PostScript printers are unable to print this page. If you 
have a PostScript printer on the Printer port, the test 
page will not be printed.