Creative Labs Sound Blaster 5.1 Live 30SB022900000 Manual De Usuario
![Creative Labs](https://files.manualsbrain.com/attachments/7912be1816206e7661797b78bc28a9a8a6ae17c4/common/fit/150/50/b1f1593eab45dc133d415822691b6a09c21cbc3b1741d2fa1707c8f60119/brand_logo.jpeg)
Los códigos de productos
30SB022900000
Troubleshooting C-3
For example, if you are playing DVD games or movies, make sure that you select the Auxiliary
device and select the Auxiliary device as your record source in Surround Mixer.
❑ If you have changed environments, make sure that your active sources are selected in
device and select the Auxiliary device as your record source in Surround Mixer.
❑ If you have changed environments, make sure that your active sources are selected in
Surround Mixer.
No sound from the speakers.
Check the following:
❑ You have connected your speakers to your card's output.
❑ You have selected the correct source in the Mixer deck.
❑ If both the above conditions have been met and you still do not get any sound, click the red
❑ You have connected your speakers to your card's output.
❑ You have selected the correct source in the Mixer deck.
❑ If both the above conditions have been met and you still do not get any sound, click the red
plus sign above the VOL control and check whether the Digital Output Only check box is
selected. If it is, you are in the Digital Output Only mode and so must connect to digital
speakers to hear the sound from your audio card. See the section on Digital Output Only in
Surround Mixer’s online help for more information.
selected. If it is, you are in the Digital Output Only mode and so must connect to digital
speakers to hear the sound from your audio card. See the section on Digital Output Only in
Surround Mixer’s online help for more information.
No audio output when playing digital files such as .WAV, MIDI files or AVI clips.
Check the following:
❑ The speakers’ volume control knob, if any, is set at mid-range. Use Creative Mixer to adjust
❑ The speakers’ volume control knob, if any, is set at mid-range. Use Creative Mixer to adjust
the volume, if necessary.
❑ The powered speakers or external amplifier are connected to the card’s Line Out or Rear Out
jack.
❑ There is no hardware conflict between the card and a peripheral device. See “Resolving I/O
❑ The Speaker selection in the Main deck of Surround Mixer corresponds to your speaker or
headphone configuration.
❑ The Original Sound sliders in either or both the Master and Source tabbed pages of the
Environmental Audio applet are set to 100%.