Motorola MT2070 Manual De Usuario

10 - 2 MT2070/MT2090 User Guide

Connect the device directly to the host interface.

Attach the modular connector of the IBM 46XX interface cable to the cable interface port on the device.

Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).

Select the port address by scanning the appropriate bar code from 

.

To modify any other parameter options, scan the appropriate bar codes in this chapter.

Host Port Connector

Interface Cable

Connect a power supply to the cradle (not shown) for fast charging.

Interface cables vary depending on configuration. The connectors illustrated in 

 are examples 

only. The connectors may be different than those illustrated, but the steps to connect the device are the 
same.

The only required configuration is the port address. The IBM system typically controls other device 
parameters.