Fujitsu 480 Manual De Usuario
C122-E003-02EN
3-67
MMB
3.2 System Menu
Table 3.44 Buttons in the [MMB#x] window
(1) Menu operation
[System]
→
[MMB]
→
[MMB#x ]
(2) GUI operation
1 Specify information to change the MMB status, and click the [Apply] button.
The specified information is then set to change the MMB status accordingly.
3.2.16
GSWB menu
The [GSWB] menu consists of the following two menus for the respective GSWB
units:
units:
z [GSWB#0] to [GSWB#1]
This section describes these menus collectively as [GSWB#x] because they share the
same window format and operating methods.
same window format and operating methods.
3.2.16.1 GSWB#x window
The [GSWB#x] window displays the status of the GSWB#x board, and the board can
be controlled and its location LED can be specified from this window.
be controlled and its location LED can be specified from this window.
Note:
Clearing the abnormal status of a GSWB enables its use during the next
reboot. If an error is detected again, the GSWB is placed back in the error
status.
reboot. If an error is detected again, the GSWB is placed back in the error
status.
Remarks: If the user is granted no appropriate privilege, the [Status Clear] button is
not displayed.
Voltage
Current voltage reading
Threshold Warning
(Low/High)
Lower and upper limits of the warning-level voltage. If no limit is
set, "-" is displayed.
set, "-" is displayed.
Critical
(Low/High)
(Low/High)
Lower and upper limits of the critical-level voltage. If no limit is
set, "-" is displayed.
set, "-" is displayed.
Button
Description
Apply
Specify control information, and click the [Apply] button to set the
specified information.
specified information.
Cancel
Click the [Cancel] button to revert to the original settings.
Item
Description