Fujitsu 480 Manual De Usuario

C122-E003-02EN

8-81

 

GSWB

8.2 Configuration Definition Commands

• Maps user priorities 0, 1, and 2 to CoS priority queue 0, user priority 3 to CoS 

priority queue 1, user priorities 4 and 5 to CoS priority queue 2, and user 
priorities 6 and 7 to CoS priority queue 3

• Maps user priorities 0, 1, 2, and 3 to CoS priority queue 2 and user priorities 4, 5, 

6, and 7 to CoS priority queue 3

• Sets the CoS value to the default value

• % Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

• Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, 

collect unit information, configuration definition information, and the 
information in different types of logs, and restart the unit.  Alternatively, 
contact a certified service engineer.

• Input parameter error.

Cause: An invalid parameter was specified.

Action: Specify the correct parameter.

Switch(config)# wrr-queue cos-map 0 0 0 1 2 2 3 3
Switch(config)#

Switch(config)# wrr-queue cos-map 2 2 2 2 3 3 3 3
Switch(config)#

Switch(config)# no wrr-queue cos-map
Switch(config)#