Fujitsu 480 Manual De Usuario

8-106

C122-E003-02EN

GSWB
CHAPTER 8 CLI Operations

 

• % Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

• Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, 

collect unit information, configuration definition information, and the 
information in different types of logs, and restart the unit.  Alternatively, 
contact a certified service engineer.

This command specifies the host or network that can have remote connections:

z telnet and ssh are the protocols available to this command for access control.
z Even after connection permission is deleted (by executing the no remote-access 

command), the telnet/ssh connection established to this device is maintained.

z The maximum number of conditions that can be set is 100.
z No connection is permitted at the time of shipment from the factory.  To enable the 

telnet server function/ssh server function, execute this command to make settings 
to allow such connections.

z Use [remote-access <ip-address>] to permit access from a specific host.
z Use [remote-access <ip-address> <subnet-mask>] to permit access from a specific 

network.  If no network address is specified in <ip-address>, a connection from the 
host of a specific network cannot be established.