Fujitsu 480 Manual De Usuario
9-2
C122-E003-02EN
EFI
CHAPTER 9 EFI Overview
CHAPTER 9 EFI Overview
9.1
Boot Function
The EFI loads the different types of EFI drivers required for boot processing and,
initialize those drivers.
initialize those drivers.
EFI Boot Manager (hereafter called "Boot Manager") automatically executes boot
processing according to preset boot information.
processing according to preset boot information.
This boot information is set in advance by the installer and stored in the NVRAM
variables of the EFI.
variables of the EFI.
9.1.1
NVRAM variables for boot control
This section describes the NVRAM variables that control boot processing.
(1) Boot#### variable
Information about the OS loader booted by Boot Manager is stored in this variable.
The information is stored in the EFI_LOAD_OPTION format as shown below. The
#### part of the variable represents a displayable string of hexadecimal numbers
ranging from 0000 to FFFF.
#### part of the variable represents a displayable string of hexadecimal numbers
ranging from 0000 to FFFF.
EFI_LOAD_OPTION Descriptor
UINT32
Attributes ;
UINT16
FilePathListLength ;
CHAR16
Description[] ;
EFI_DEVICE_PATH
FilePathList[] ;
UINT8
OptionalData [] ;
(2) Driver#### variable
Information about the drivers loaded immediately before booting by Boot Manager is
stored in this variable.
stored in this variable.
The information is stored in the EFI_LOAD_OPTION format as shown above. The
#### part of the variable represents a displayable string of hexadecimal numbers
ranging from 0000 to FFFF.
#### part of the variable represents a displayable string of hexadecimal numbers
ranging from 0000 to FFFF.
(3) BootOrder variable
This variable specifies the actual boot sequence of the target programs specified by
the Boot#### variable.
the Boot#### variable.