Gateway M520 Manual De Usuario
112
www.gateway.com
To identify this computer on the network:
1
Click
Start
, then click
Control Panel
. The Control Panel window opens.
If your Control Panel is in Category View, click
Performance and
Maintenance
. The Performance and Maintenance window opens.
2
Click/Double-click
System
. The System Properties dialog box opens.
3
Click
Computer Name
.
4
Click
Change
. The Computer Name Changes dialog box opens.
5
Type a unique computer name in the
Computer name
box. This name
identifies the computer to other users on the network. Use a
computer name of up to 15 characters with no blank spaces. Each
computer name must be unique on your network. All-numeric
computer names are not allowed. Names must contain some letters.
computer name of up to 15 characters with no blank spaces. Each
computer name must be unique on your network. All-numeric
computer names are not allowed. Names must contain some letters.
6
Type a name for your workgroup in the
Workgroup
box. Use a
workgroup name of up to 15 characters with no blank spaces. The
workgroup name must be the same for all computers in your network
workgroup, and the name must be different than any computer
name on your network.
workgroup name must be the same for all computers in your network
workgroup, and the name must be different than any computer
name on your network.
7
Click
OK
to close the Computer Name Changes dialog box.
Configuring the TCP/IP protocol
A networking protocol is a language computers use to talk to each other.
One of several available protocols must be set up on each computer you
plan to use on your network. We recommend you use the Transmission
Control Protocol/Internet Protocol (TCP/IP), which is widely accepted
and compatible for local area networks (LANs), as well as for Internet
communications.
One of several available protocols must be set up on each computer you
plan to use on your network. We recommend you use the Transmission
Control Protocol/Internet Protocol (TCP/IP), which is widely accepted
and compatible for local area networks (LANs), as well as for Internet
communications.
When networking is set up in Windows XP or Windows 2000, TCP/IP is
automatically installed as the default protocol.
automatically installed as the default protocol.
Important
You must give each computer on the network a
unique Computer Name and the same Workgroup
Name.
unique Computer Name and the same Workgroup
Name.